Home > News >
News Center

Sunrise Refractory Ceramic Fiber Modules For Sales

The ceramic fiber module is made of ceramic fiber blanket of corresponding material according to the structure and size of the fiber component, and is processed by special mechanical equipment. It maintains a certain proportion of compression to ensure that the ceramic fiber component expands in different directions after the ceramic fiber component wall lining is completed, so that the ceramic fiber components are mutually squeezed into a seamless whole. The ceramic fiber component is directly attached to the industrial furnace shell by various forms of anchors.
The ceramic fiber module has the excellent characteristics of ceramic fiber. The fiber module is always in the expanded state to compensate for the heat shrinkage, so that the whole body of the furnace body has high sealing performance; it has the ability to resist thermal shock; the lining body does not need to be dried and cured, and can be put into use immediately after installation. The anchoring system is remote from the hot face of the furnace body such that the metal anchor is at a relatively low safe temperature.
If you have any questions or good suggestions on our ceramic fiber modules, or if you want to know more information about our ceramic fiber modules, please write them and send to us, a representative will contact you within one business day. Besides, we guarantee that your information will not be divulged to the third party.
上一篇:The Characteristics of Sunrise Refractory Glass Mold Brick 下一篇:Guidelines for the selection of refractories for glass kiln
Product List
Contact Us



Skype:tkfanyi zzty371



Tel: +86-371-63838939

Fax: +86-371-63835539